|
It's Easier, Cheaper and Better
than you think!!!
We can show you how to get cut down your bill while
reducing pollution!
A Grid-Connect system gives you the best of both
worlds. You have the instant power from the grid, but also free,
clean energy from the sun during the day. If you don't use as much
as what you produce, it is fed back into the grid and the power
company PAYS YOU for the excess!!
The solar modules are designed to look nice on the
roof of a suburban house and you can start with a small outlay. When
you look at the fact that the components last from 15 - 30 years,
you can see that it is a very worth-while investment.
For this type of
system, you will need:
-
An Energy Converter (normally solar
modules though wind can be used)
-
A Regulator (unless the solar modules (#1) are
self-regulated)
-
Batteries (only if you want power during a
'black out')
-
Grid-Connect Inverter (rated to your power
need)
-
Wires & connectors to go between
#1-4
-
THAT'S IT!!
It doesn't get too much easier! In most cases a
licensed electrician is needed to wire the inverter into the grid -
though the rest can normally be done yourself. A diagram showing
just how basic it can be with the PV EDGE inverter (which by the way
looks great and is an amazing converstaion piece for your loungeroom
wall!):

STARTING FROM SCRATCH?
Great! Now that you know that you need a GRID
CONNECT system, you need to work out the exact power requirements
for your houes / business. Click the Calculations link to the
left.
If you are just wanting to setup within a budget to
see how it works, have some fun & save what you can, then go to
www.bonzabuy.com.au buy a
ready-made kit or piece the 5 or 6 items together to add upto what
you want to
spend... |